Command line options for EZIPUTIL.exe

1 Star2 Stars3 Stars4 Stars5 Stars
Loading...
  • Product:
    ExtremeZ-IP
  • Version:
    5.0-Current
  • Document Type:
    Info
  • Revised:
    3/9/2011
  • Reviewed:
    4/2/2008

Summary:

The following commands can be issued to ExtremeZ-IP as command-line parameters using the provided utility eziputil.exe. They can be issued through a command prompt, a batch file, or other mechanisms.

Description:

You can get this information by running EZIPUTIL with no arguments:

        EZIPUTIL VOLUME           For syntax on managing volumes.
        EZIPUTIL SERVER           For syntax on server commands.
        EZIPUTIL PRINT            For syntax on managing print queues.

If you run “EZIPUTIL VOLUME”, you get a detailed list of all possible volume commands. All available commands are listed below:

To start ExtremeZ-IP:

        EZIPUTIL SERVER /START
                [/SERVERNAME:servername]            if not local
                [/SERVICENAME:servicename]          if not 'ExtremeZ-IP'

To stop ExtremeZ-IP:

        EZIPUTIL SERVER /STOP
                [/SERVERNAME:servername]            if not local
                [/SERVICENAME:servicename]          if not 'ExtremeZ-IP'

To suspend file services:

        EZIPUTIL SERVER /SUSPEND
                [/SERVERNAME:servername]            if not local
                [/SERVICENAME:servicename]          if not 'ExtremeZ-IP'
                [/DELAY:minutes]                    delay in minutes (1-60min). Default is 2min.
                [/MESSAGE:message]                  message to send to client
                [/ALLOW-LOGIN]                      allow client to login during scheduled suspend

To cancel scheduled suspend and resume file services:

        EZIPUTIL SERVER /RESUME
                [/SERVERNAME:servername]            if not local
                [/SERVICENAME:servicename]          if not 'ExtremeZ-IP'

To get server statistics from ExtremeZ-IP:

        EZIPUTIL SERVER /INFO
                [/SERVERNAME:servername]            if not local
                [/SERVICENAME:servicename]          if not 'ExtremeZ-IP'

To get a list of open files from ExtremeZ-IP:

        EZIPUTIL SERVER /FILES
                [/SERVERNAME:servername]            if not local
                [/SERVICENAME:servicename]          if not 'ExtremeZ-IP'

To get a list of currently logged-in users from ExtremeZ-IP:

        EZIPUTIL SERVER /USERS
                [/SERVERNAME:servername]            if not local
                [/SERVICENAME:servicename]          if not 'ExtremeZ-IP'

To refresh settings from the registry:

        EZIPUTIL SERVER /REFRESH_REGISTRY
                [/SERVERNAME:servername]            if not local
                [/SERVICENAME:servicename]          if not 'ExtremeZ-IP'

To manage ExtremeZ-IP’s Service Connection Point:

        EZIPUTIL SERVER /SCP
                [/SERVERNAME:servername]            if not local
                [/SERVICENAME:servicename]          if not 'ExtremeZ-IP'

                [/N=fully-qualified-domain-name] (default = local machine name)]
                [/I] to Install the SCP (which overwrites any previously defined SCP)
                [/U] to uninstall the SCP
                [/D] to Display the SCP
                [/Q] 'quiet' mode - output or prompts will not be written to the window.
                [/L] to Log the results of the operation to '.\EzScpManager.log'
                [/S=ServiceName] to override 'ExtremeZ-IP' stored in SCP when installing.

                Note: /I, /U, and /D are mutually exclusive.

To spool the debug log:

        EZIPUTIL SERVER /SPOOL_LOG
                [/SERVERNAME:servername]            if not local
                [/SERVICENAME:servicename]          if not 'ExtremeZ-IP'

To add a volume (items in bold are available in ExtremeZ-IP 5.2 and later):

        EZIPUTIL VOLUME /ADD
                /NAME:volumename
                /PATH:root directory path
                [/READONLY:TRUE|FALSE]          The default is FALSE.
                [/GUESTSALLOWED:TRUE|FALSE]     The default is TRUE.
                [/PASSWORD:password]            The default is no password.
                [/MAXUSERS:number|UNLIMITED]    The default is unlimited.
                [/PERSIST:TRUE|FALSE]           The default is TRUE.
                [/HOMEDIRECTORY:TRUE|FALSE]     The default is FALSE.
                [/SEARCHINDEX:TRUE|FALSE]       The default is TRUE.
                [/SEARCHINDEXPATH:index path]   The default is the root of the
                                                volume.
                [/RESET_PERMISSIONS:TRUE|FALSE] The default is FALSE.
                [/FILENAME_POLICY:TRUE|FALSE]   The default is FALSE.
                [/IS_TM_VOLUME:TRUE|FALSE]      The default is FALSE.
                [/USE_TM_QUOTA:TRUE|FALSE]      The default is FALSE.
                [/TM_QUOTA:number]              The default is 100.
                [/SUPPORT_ACLS:TRUE|FALSE]      The default is FALSE.
                [/SUPPORT_SPOTLIGHT:TRUE|FALSE] The default is FALSE.
                [/SERVERNAME:servername]        if not local
                [/SERVICENAME:servicename]      if not 'ExtremeZ-IP'

To edit a volume (items in bold are available in ExtremeZ-IP 5.2 and later):

        EZIPUTIL VOLUME /EDIT
                /NAME:volumename
                [/PATH:root directory path]
                [/READONLY:TRUE|FALSE]          The default is FALSE.
                [/GUESTSALLOWED:TRUE|FALSE]     The default is TRUE.
                [/PASSWORD:password]            The default is no password.
                [/MAXUSERS:number|UNLIMITED]    The default is unlimited.
                [/HOMEDIRECTORY:TRUE|FALSE]     The default is FALSE.
                [/SEARCHINDEX:TRUE|FALSE]       The default is TRUE.
                [/SEARCHINDEXPATH:index path]   The default is the root of the
                                                volume.
                [/RESET_PERMISSIONS:TRUE|FALSE] The default is FALSE.
                [/FILENAME_POLICY:TRUE|FALSE]   The default is FALSE.
                [/IS_TM_VOLUME:TRUE|FALSE]      The default is FALSE.
                [/USE_TM_QUOTA:TRUE|FALSE]      The default is FALSE.
                [/TM_QUOTA:number]              The default is 100.
                [/SUPPORT_ACLS:TRUE|FALSE]      The default is FALSE.
                [/SUPPORT_SPOTLIGHT:TRUE|FALSE] The default is FALSE.
                [/SERVERNAME:servername]        if not local
                [/SERVICENAME:servicename]      if not 'ExtremeZ-IP'

To remove a volume:

        EZIPUTIL VOLUME /REMOVE
                /NAME:volumename
                [/DISCONNECT:TRUE|FALSE]        The default is FALSE.
                                                If TRUE, connected users
                                                will be disconnected.
                [/SERVERNAME:servername]        if not local
                [/SERVICENAME:servicename]      if not 'ExtremeZ-IP'

To suspend a volume:

        EZIPUTIL VOLUME /SUSPEND
                /NAME:volumename
                [/DISCONNECT:TRUE|FALSE]        The default is FALSE.
                                                If TRUE, connected users
                                                will be disconnected.
                [/SERVERNAME:servername]        if not local
                [/SERVICENAME:servicename]      if not 'ExtremeZ-IP'

To restart a volume:

        EZIPUTIL VOLUME /RESTART
                /NAME:volumename
                [/DISCONNECT:TRUE|FALSE]        The default is FALSE.
                                                If TRUE, connected users
                                                will be disconnected.
                [/SERVERNAME:servername]        if not local
                [/SERVICENAME:servicename]      if not 'ExtremeZ-IP'

To rebuild volume’s search index:

        EZIPUTIL VOLUME /REINDEX
                /NAME:volumename
                [/SERVERNAME:servername]        if not local
                [/SERVICENAME:servicename]      if not 'ExtremeZ-IP'

To get a list of volumes:

        EZIPUTIL VOLUME /LIST
                [/SERVERNAME:servername]        if not local
                [/SERVICENAME:servicename]      if not 'ExtremeZ-IP'

To configure options on a volume:

        EZIPUTIL VOLUME /SET
                /NAME:volumename
                [/OS9ICON:path to OS 9 icon]
                [/OSXICON:path to OS X icon]
                [/SERVERNAME:servername]        if not local
                [/SERVICENAME:servicename]      if not 'ExtremeZ-IP'

To migrate SFM shares (ExtremeZ-IP 5.2 and later only):

        EZIPUTIL VOLUME /MIGRATE_SFM
                [/SERVERNAME:servername]        if not local
                [/SERVICENAME:servicename]      if not 'ExtremeZ-IP'

To replicate SMB shares (ExtremeZ-IP 5.2 and later only):

        EZIPUTIL VOLUME /REPLICATE_SMB
                [/SERVERNAME:servername]        if not local
                [/SERVICENAME:servicename]      if not 'ExtremeZ-IP'

To add a print queue:

        EZIPUTIL PRINT /ADD
                /NAME:queuename
                /METHOD:method                      Processing method (see
                                                    below)
                [/PPD:PPD file path]
                [/PPD_ONLY_FROM_SERVER:TRUE|FALSE]  The default is FALSE.
                [/PERSIST:TRUE|FALSE]               The default is TRUE.
                [/SERVERNAME:servername]            if not local
                [/SERVICENAME:servicename]          if not 'ExtremeZ-IP'

When using the /ADD command, you may pass the following options to specify the processing method:

                /METHOD:APPLETALK  /ZONE:zone     /PRINTER:printer
                /METHOD:WINDOWS    /PRINTER:printer
                /METHOD:LPR        /HOST:host     [/QUEUE:queue]
                /METHOD:DIRECTORY  /PATH:path to directory

To rename a print queue:

        EZIPUTIL PRINT /RENAME
                /NAME:queuename
                /NEWNAME:newqueuename
                [/SERVERNAME:servername]            if not local
                [/SERVICENAME:servicename]          if not 'ExtremeZ-IP'

To remove a print queue:

        EZIPUTIL PRINT /REMOVE
                /NAME:queuename
                [/SERVERNAME:servername]            if not local
                [/SERVICENAME:servicename]          if not 'ExtremeZ-IP'

To get a list of print queues:

        EZIPUTIL PRINT /LIST
                [/SERVERNAME:servername]            if not local
                [/SERVICENAME:servicename]          if not 'ExtremeZ-IP'

To refresh validation code text files for all queues:

        EZIPUTIL PRINT /REFRESH_CODES
                [/SERVERNAME:servername]            if not local
                [/SERVICENAME:servicename]          if not 'ExtremeZ-IP'

To export the print processing log to a text file:

        EZIPUTIL PRINT /EXPORT_LOG
                [/CLEARLOG:TRUE|FALSE]              The default is FALSE.
                /PATH:fullpathoflogfile
                [/SERVERNAME:servername]            if not local
                [/SERVICENAME:servicename]          if not 'ExtremeZ-IP'

To restart a print queue:

        EZIPUTIL PRINT /RESTART
                /NAME:queuename
                [/SERVERNAME:servername]            if not local
                [/SERVICENAME:servicename]          if not 'ExtremeZ-IP'

To suspend a print queue:

        EZIPUTIL PRINT /SUSPEND
                /NAME:queuename
                [/SERVERNAME:servername]            if not local
                [/SERVICENAME:servicename]          if not 'ExtremeZ-IP'

To replicate shared Windows queues (ExtremeZ-IP 5.2 and later only):

        EZIPUTIL PRINT /IMPORT:WINDOWS
                /NAME:queuename
                [/SERVERNAME:servername]            if not local
                [/SERVICENAME:servicename]          if not 'ExtremeZ-IP'

Tags: ,